Custom Wiring Harnesses
Hand Crafted Pickups
Parts
Ordering Instructions
About Me
Free Wiring Info
Customer Comments
Artists
Contact and Warranty
Links
Webpage Translator
Currency Converter
HAS Sound Custom Harnesses and Wiring Kits
We accept payment by credit
cards and
safely and securely through GoogleCheckout.
If you prefer to pay with check or moneyorder, please
click the "Add to Cart"
button next to each item that you would like to order.
At the checkout page, choose "Money Order by Mail" or "Personal Check by
Mail".
Funds must be in USD and payable on a United States
Bank or a US Postal Money Order.
All shipments will be held until funds clear our
bank.
Important: You must have your pop-up blocker disabled for our shopping
cart to work.
While you're here, be sure to also check out our
line of Passive Guitar Controls
and Handcrafted Pickups!
All HAS Sound harnesses are hand wired, hand assembled and hand tested right here in our
shop and are built
using
actual
pickguards and control plates to assure correct spacing and fit!
All are pre-wired and ready to install.
Instructions are included. Unless
otherwise stated, pickups, pickguards, control plates and knobs are not included.
These HAS Sound Custom Harnesses are for use with passive pickups only.
Strat® Style Harnesses
Tele® Style Harnesses
Gibson® Style Harnesses
Bass Harnesses
Pre-Wired Loaded Pickguard
Assemblies
Email for pricing
and availability for left-hand wiring
|
SH1 Strat® Harness
This pre-wired harness includes one volume control with treble retainer circuit, one master tone control featuring your choice of tone capacitor, one master Midrange Control, a 5-way pickup switch, output jack. Descriptions of these controls can be found on our home page. Please choose tone control option at right. Descriptions of tones can be found at the bottom of our home page. |
$69.95 | ||
|
DS1 Strat® Harness This pre-wired harness includes one volume control with treble retainer circuit built on a push-pull pot for neck pickup on/off, one master Midrange Control, one master tone control featuring your choice of tone capacitor, a 5-way pickup switch and output jack. Descriptions of these controls can be found on our home page. Please choose tone control option at right. Descriptions of tones can be found at the bottom of our home page. |
$79.95 | ||
 |
KS1 Strat® Harness This pre-wired harness includes one volume control mounted on a push-pull pot (see below) with treble retainer circuit, one master tone control featuring your choice of tone capacitor, one master Midrange Plus Control, output jack and a special 5-way pickup selector switch giving you the following configurations: With the volume control pushed in: 1- Neck 2- Neck + Middle in Parallel 3- Neck + Bridge in Parallel 4- Middle + Bridge in Parallel 5- Bridge With the volume control pulled out: 1- All three pickups in series 2- Middle + Neck in series 3- Bridge + Neck in series 4- Middle + Bridge in series 5- All three pickups in parallel Please choose tone control option at right. Descriptions of tones can be found at the bottom of our home page. |
$109.95 ea | |
|
TH1 Tele® Harness This pre-wired harness includes one 250k volume control with treble retainer circuit, one master Push-Pull Midrange / Tone Control featuring your choice of tone capacitor, output jack, a 3-way pickup switch. Descriptions of these controls can be found on our home page. Please choose tone control option at right. Descriptions of tones can be found at the bottom of our home page. Note: If solid shaft option is chosen, Brass Sleeves will be included for pots that are only available in split shaft versions. |
$69.95 | ||
 |
DT1 4-Way Tele®
Harness This pre-wired harness includes one 250k volume control with treble retainer circuit, one master Push-Pull Midrange / Tone Control featuring your choice of tone capacitor, output jack, and a special 4-way pickup selector switch giving you the following configurations: Position 1- Neck + Bridge, Series Position 2- Neck Position 3- Bridge + Neck, Parallel Position 4- Bridge Please choose tone control option at right. Descriptions of tones can be found at the bottom of our home page. Note: If solid shaft option is chosen, Brass Sleeves will be included for pots that are only available in split shaft versions. |
$69.95 | |
|
DT2 Concentric Tele®
Harness This pre-wired harness includes four controls by way of two stacked concentric pots. This setup offers individual volume and tone controls for each pickup and features your choice of tone capacitors, treble retainer circuits, 3-way pickup switch, output jack. Does not include knobs, for concentric knobs please see my parts page. Please choose the value of tone capacitors you would like from the drop down menu at right. #1 selection is the neck tone and #2 is the bridge tone. Descriptions of tones can be found at the bottom of our home page. Easy installation instructions included. |
$89.95 | ||
 |
ST1 5-Way Tele® Harness This pre-wired harness includes one 250k volume control with treble retainer circuit, one master Push-Pull Midrange / Tone Control featuring your choice of tone capacitor, output jack, and a special 5-way pickup selector switch giving you the following configurations. Position 1- Neck Position 2- Bridge + Neck in Series Position 3- Bridge + Neck in Parallel Position 4- Bridge + Neck in Series, Out of Phase Position 5- Bridge Please choose tone control option at right. Descriptions of tones can be found at the bottom of our home page. Note: If solid shaft option is chosen, Brass Sleeves will be included for pots that are only available in split shaft versions. |
$89.95 | |
|
ST2 5-Way Tele® Harness This pre-wired harness includes one 250k volume control with treble retainer circuit, one master Push-Pull Midrange / Tone Control featuring your choice of tone capacitor, output jack, and a special 5-way pickup selector switch giving you the following configurations. Position 1- Neck Position 2- Bridge + Neck in Parallel Position 3- Bridge, Tone Bypass Position 4- Bridge, With Tone Position 5- Bridge + Neck in Series Please choose tone control option at right. Descriptions of tones can be found at the bottom of our home page. Note: If solid shaft option is chosen, Brass Sleeves will be included for pots that are only available in split shaft versions. |
$89.95 | ||
|
ST3 5-Way Nashville
Tele® Harness |
$109.95 ea | ||
|
JD1 5-Way Tele® Harness Inspired by the Jerry Donahue Telecaster®, this pre-wired harness includes one 250k volume control with treble retainer circuit, one master Push-Pull Midrange / Tone Control featuring your choice of tone capacitor, output jack, and a special 5-way pickup selector switch giving you the following configurations. Position 1- Neck without tone Position 2- Neck with tone Position 3- Bridge + Neck in parallel with tone Position 4- Bridge + Neck in series, out of phase, with capacitance, without tone Position 5- Bridge with tone Please choose tone control option at right. Descriptions of tones can be found at the bottom of our home page. Note: If solid shaft option is chosen, Brass Sleeves will be included for pots that are only available in split shaft versions. |
$89.95 | ||
|
Pre-Wired Custom
Tele® Control Plate Order one of our Custom Tele® Harnesses from above and then add this option to your cart. We will mount your harness on a new chrome control plate and include chrome dome control knobs, a black switch knob, and mounting screws. Ready to drop in, you'll just need to attach the pickup leads. This selection only available with the purchase of one of the custom Tele® harnesses above. |
$30.00 |
||
 |
LP1 Les Paul®
Style Harness This pre-wired harness features four 500k pots including two volume controls wired for independent pickup control in middle position with Treble Retainer Circuits, a master tone control with your choice of capacitor, our master Midrange Control, a 3-way strait toggle pickup selector, and an output jack. Gibson Les Pauls normally require long shaft (3/4 inch thread) pots while most other guitars including Les Paul copies use standard (3/8 inch thread) pots. Installation instructions included. |
$89.95 | |
|
Image Not Available |
JP1 Jimmy Page Les
Paul®
Style Harness This pre-wired harness was inspired by the cool Jimmy Page modified Les Paul and features four 500k push-pull pots: two volume controls wired for independent pickup control in middle position and push-pull coil split functions for each pickup and a Treble Retainer Circuit, two tone controls (bridge tone push-pull puts neck and bridge pickups in/out of phase, neck tone push-pull puts neck and bridge pickups in series/parallel), a 3-way strait toggle pickup selector, and an output jack. IMPORTANT: Your pickups must have 4-conductor wiring to work with this harness.. SHAFT LENGTH NOTE: Gibson Les Pauls normally require long shaft (3/4 inch thread) pots while most other guitars including Les Paul copies use standard (3/8 inch thread) pots. TONE NOTE: Jimmy used the "Dark Tone" in his Les Paul. Installation instructions included. |
$124.95 | |
 |
SG1 SG®
Style Harness This pre-wired harness is for most 2 pickup/4 control guitars is the same as our LP1 Harness above, except that the pickup switch is located in the control cavity. Includes your choice of a 3-way strait or angle pickup switch. |
$89.95 | |
|
PB1 P Bass Harness This pre-wired P. Bass harness includes one 250k CTS master volume control, Bass Midrange/Tone Control, and an output jack. Includes your choice of tone capacitor. Solid shaft pots. |
$49.95 | ||
 |
JB1 J Blender Harness This pre-wired J. Bass harness includes one master volume control, a pickup balance control with center detent, Bass Midrange/Tone Control, and an output jack. Includes your choice of tone capacitor. Note: If solid shaft option is chosen, Brass Sleeves will be included for pots that are only available in split shaft versions. Installation instructions included. |
$79.95 | |
 |
JB2 Series/Parallel J Harness This pre-wired J. Bass harness includes neck volume control mounted on a push-pull pot to switch between series and parallel wiring for your pickups, bridge volume control, our Bass Midrange/Tone Control, and an output jack. Includes your choice of tone capacitor. Note: If solid shaft option is chosen, Brass Sleeves will be included for pots that are only available in split shaft versions. Installation instructions included. |
$79.95 | |
 |
JB3 5-Way Rotary J Harness This pre-wired J. Bass harness includes one master volume control, a rotary 5-way pickup selector switch, Bass Midrange/Tone Control, and an output jack. Includes your choice of tone capacitor. Solid shaft pots. Rotary switch offers the following pickup selections: Position 1- Neck Position 2- Bridge + Neck in Series Position 3- Bridge + Neck in Parallel Position 4- Bridge + Neck in Series, Out of Phase Position 5- Bridge |
$99.95 | |
|
Pre-Wired Custom
Jazz® Control Plate Order one of our Custom Jazz® Harnesses from above and then add this option to your cart. We will mount your harness on a new chrome control plate and include black knobs and mounting screws, assembled. Ready to drop in, you'll just need to attach the pickup leads and bridge ground. This selection only available with the purchase of one of the custom Jazz® harnesses above. |
$25.00 | ||
 |
Stack Knob Concentric
Harness This pre-wired vintage style stacked knob harness is perfect for your P/J Bass or Jazz styled bass and includes two stacked concentric pots, and an output jack and offers a volume and tone control for each pickup. Does not include knobs, for concentric knobs please see my parts page. Please choose the value of tone capacitors you would like from the drop down menu at right. TIP: The '62 Fender Jazz Bass had a Dark Tone in the neck position and a Special Tone in the bridge. See "Tone Descriptions" at the bottom of our home page. Installation instructions included. Please let me know if P-Bass spacing or Vintage J-Bass spacing is required. |
$69.95 | |
|
Custom Built Strat® Style Pickguard Assembly Order one of our Custom Strat® style harnesses from above, then your choice of pickguards and knobs from our Parts page and your choice of pickups from our Pickups page. You want to use your own pickups or knobs? Leave them off the order! YOU decide what you want and how far that you want us to build it! We will assemble and wire the the parts that you order for FREE! All that you have to do is connect the two wires to the output jack and attach the string ground to the back of the volume pot. Mounting screws are included. |
|
|
Several trademarks are used throughout this site for descriptive purposes.
Les Paul®, P-90® and Gibson® are trademarks of Gibson USA. Fender®, |
